Copy a capture from ASA with context

Answered Question
Jul 14th, 2009
User Badges:
  • Bronze, 100 points or more

I'm trying to copy an capture I've done in an ASA with multiple contexts.


The problem is that inside a context I don't have the command "copy capture:"


The only options for copy command inside a context are "copy running tftp" and "copy startup tftp"


Correct Answer by robertson.michael about 8 years 1 week ago

Hi Guilherme,


To copy a capture in multiple context mode, you use the 'copy capture' command from the system context and specify the context where the capture is contained. For example:


copy capture:context1/cap1 tftp://10.1.1.1/cap1


You can also download it directly from a browser by navigating to:


https:///capture/cap1/pcap


Here is the command reference for 'copy capture':

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2123161


Hope that helps.


-Mike

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
robertson.michael Tue, 07/14/2009 - 05:46
User Badges:
  • Silver, 250 points or more

Hi Guilherme,


To copy a capture in multiple context mode, you use the 'copy capture' command from the system context and specify the context where the capture is contained. For example:


copy capture:context1/cap1 tftp://10.1.1.1/cap1


You can also download it directly from a browser by navigating to:


https:///capture/cap1/pcap


Here is the command reference for 'copy capture':

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2123161


Hope that helps.


-Mike

Actions

This Discussion