cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
887
Views
0
Helpful
3
Replies

AD HOc conference issue

michaeljbyrne
Level 1
Level 1

I can't seem to do it across the VPN.

Everyone is default g.711

Internal it works fine.

The site across the vpn can not do conferencing. So it seems that something is off. I just can't put my finger on it.

I have the CFB confgiure and have the MRG in both DP's

3 Replies 3

Jaime Valencia
Cisco Employee
Cisco Employee

and exactly what happens???

no audio?

error when pressing conference 1st time?

error when trying to conference the 3 parties?

hard phones? IPC?

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

fast busy.

Trying to conference the 3 parties

any phone

nwkotze
Level 1
Level 1

Enable CallManager detailed trace, you should find "out of resource" or simulator message.

Conferencing resource can be configured as a profile on the Voice Gateway if you have enough DSP resource. How to find out?

Do the "Max sess ?" under the "dspfarm profile 1 conference", you only need one!!

You can also do a "sho inv" - look at PBDM's.

voice-card 0

dspfarm

dsp services dspfarm

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

conference-join custom-cptone jointone

conference-leave custom-cptone leavetone

associate application SCCP

Max sess ?

!

sccp ccm group 500

bind interface GigabitEthernet0/1.5

associate ccm 500 priority 1

associate profile 1 register GW-CNF

!

sccp local GigabitEthernet0/1.5

sccp ccm 10.41.5.1 identifier 500 version 4.1

sccp

!

Now add "Hardware conferance bridge" "GW-CNF" in CallManager and add to Resource Group for phones. Restart CallManager.

After Restart check CFB registration, and test.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: