Getting error when I tried to make a call from SRST registered phone:
Jul 14 17:50:58.954: ISDN Se0/3/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Calling num 507316
Jul 14 17:50:58.954: ISDN Se0/3/0:15 Q931: Sending SETUP callref = 0x0083 callID = 0x8004 switch = primary-net5 interface = User
Jul 14 17:50:58.958: ISDN Se0/3/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0083
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839C
Exclusive, Channel 28
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0180, '507316'
Called Party Number i = 0x81, '008'
Jul 14 17:50:59.034: ISDN Se0/3/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x8083
Cause i = 0x82AC - Requested circuit/channel not available
Incoming calls are working fine on the same port.
2 dial peers to cover Incoming and Outgoing calls:
dial-peer voice 9 pots
description ** Outgoing **
dial-peer voice 900 pots
description ** Incoming **
incoming called-number .
Anyone knows why I'm getting: Cause i = 0x82AC - Requested circuit/channel not available?