diagnostic command for cat 6500

carl_townshend · ‎07-15-2009

hi all

is there any tests i can run on the cat 6500 to check line cards etc, whilst the system is running ?

dario.didio · ‎07-15-2009

Hi,

yes you can using online diagnostics.

Take a look at this document:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper0900aecd801e659f.html

HTH,

Dario

carl_townshend · ‎07-15-2009

is there a simple no disruptive quick test I can run for the whole system ?

Leo Laohoo · ‎07-15-2009

Hi Carl,

During the POST of the chassis or card insertion, the system conducts a test. To see the result, do a "sh module" and check the logs for any discrepancies.