FWSM IOS and ASDM files

Answered Question
Jul 15th, 2009

Hi!

How can I check file names of IOS and asdm loaded to FWSM? If I load new version of IOS, how can I erase the old one? Is it rewrited automaticly?

Command "dir flash" shows only that they presented on the flash.

dir flash:

Directory of flash:/

2 -rw- 3394960 <no date> asdm

1 -rw- 6062080 <no date> image

I have this problem too.
0 votes
Correct Answer by Kureli Sankar about 7 years 6 months ago

You cannot. The flash can only take one image and one asdm unlike the PIX/ASA. When you issue

copy tftp flash:image

and

copy tftp flash:adsm

Both of them will get replaced. Upon reload

sh ver should tell you the image and the asdm version loaded.

Image upgrade/downgrade required a reload

asdm upgrade/downgrade does not require a reload.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Kureli Sankar Wed, 07/15/2009 - 05:28

You cannot. The flash can only take one image and one asdm unlike the PIX/ASA. When you issue

copy tftp flash:image

and

copy tftp flash:adsm

Both of them will get replaced. Upon reload

sh ver should tell you the image and the asdm version loaded.

Image upgrade/downgrade required a reload

asdm upgrade/downgrade does not require a reload.

Actions

This Discussion