Solved: 2960 Switch no accepting commands

Brent Rockburn · ‎07-15-2009

I have a brand new cisco 2960 48 port switch running c2960-lanbasek9-mz.122-50.SE1.bin

The commands below won't take. Are they required? I read on cisco's site that they were no longer necessary but somehow that seems wrong to me. In any case, any help would be great

Thanks,

Brent

wrr-queue bandwidth 1 2 3 0

wrr-queue cos-map 1 0 1

wrr-queue cos-map 2 2 3

wrr-queue cos-map 3 4

wrr-queue cos-map 4 5 6 7

Edison Ortiz · ‎07-15-2009

2960 does not use Weighted Round Robin, it uses Share Round Robin.

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_50_se/configuration/guide/swqos.html#wp1284809

HTH,

__

Edison.

View solution in original post

Edison Ortiz · ‎07-15-2009

2960 does not use Weighted Round Robin, it uses Share Round Robin.

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_50_se/configuration/guide/swqos.html#wp1284809

HTH,

__

Edison.