OSPF not coming up

Unanswered Question
Jul 15th, 2009

Hi

I am facing problem related to OSPF

I am runing OSPF between 6 routers in area 0 with bfd support

for testing purpose i have executed shut command on one of the interface as expected teh OSPF stae changed to FULL To DOWN, but when interface made no shut interface came up ping also fine but OSPF doesn't come up still in DOWN

FYI I am using the IOS c7600s3223-advipservicesk9-mz.122-33.SRC4.bin"

Regards,

Nilesh

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Wed, 07/15/2009 - 13:20

Make sure your MD5 authentication is up to snuff. Try removing MD5 and if OSPF comes up, re-key the MD5 string and must match - caveat on the space within the key.

__

Edison.

netlinkin Fri, 07/17/2009 - 00:40

Tried same already but not improvement,

Can you guide further.

Regards,

Nilesh

Pavel Bykov Fri, 07/17/2009 - 00:47

1. Debug BFP

2. Try removing BFD

3. After turning on the following, do shut/no shut again.

Debug ip ospf adj

Debug ip ospf events

debug ip ospf packet

What's the state on the other side?

Actions

This Discussion