My 2620XM - Enough?

Unanswered Question
Jul 15th, 2009
User Badges:

I'm starting on my ICND2 materials and want to do some subinterface work for VLANs. I'm not affiliated with a company right now so don't have access to IOS resources. I suppose I can't do SSH with my current IOS either?

R_2620XM_1>sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.2(8)T5, RELEASE SOFTWARE (fc1)

TAC Support:

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Fri 21-Jun-02 08:50 by ccai

Image text-base: 0x80008074, data-base: 0x80A2BD40

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

R_2620XM_1 uptime is 7 hours, 49 minutes

System returned to ROM by reload

System image file is "flash:c2600-i-mz.122-8.T5.bin"

cisco 2620XM (MPC860P) processor (revision 0x400) with 126976K/4096K bytes of me


Processor board ID JMX0818L0RL (794035639)

M860 processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

32K bytes of non-volatile configuration memory.

49152K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Collin Clark Thu, 07/16/2009 - 05:23
User Badges:
  • Purple, 4500 points or more

You have a fast ethernet interface so you should be able to configure subinterfaces. You do not have a crypto image so no SSH.

Hope that helps.


This Discussion