WiSM installation problems

Unanswered Question
Jul 16th, 2009

I'm trying to install the WiSM in a 6509-E switch. There will be no connection between Sup720-3B and WisM. The Service Port is not getting ip address bij DHCP scope on 6509 switch.

wism service-vlan 51

wism module 8 controller 1 allowed-vlan 50,51,64,66,68,70,72,74,76,78,80,82,84

wism module 8 controller 1 allowed-vlan 86,88,90,92,94,96,98,100,102,128,130

wism module 8 controller 1 allowed-vlan 132,144

wism module 8 controller 2 allowed-vlan 50,51,64,66,68,70,72,74,76,78,80,82,84

wism module 8 controller 2 allowed-vlan 86,88,90,92,94,96,98,100,102,128,130

wism module 8 controller 2 allowed-vlan 132,144

wism module 8 controller 1 native-vlan 51

I configured a layer 2 and layer 3 VLAN 51 and assigned ip address to the SVI..

Service Vlan : 51, Service IP Subnet : 10.200.51.1/255.255.255.248

WLAN

Slot Controller Service IP Management IP SW Version Status

----+-----------+----------------+----------------+-----------+---------------

8 1 0.0.0.0 0.0.0.0 Service Port Up

8 2 0.0.0.0 0.0.0.0 Service Port Up

Also Session slot 8 pro 1 is not possible..

What can be wrong ?

Regards

Remco

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ericgarnel Thu, 07/16/2009 - 05:02

have you enabled dhcp on the 6509?

service dhcp

Session slot 9 pro 1 will not be possible until you can assign it an ip address

Actions

This Discussion

 

 

Trending Topics - Security & Network