Cisco Netflow

Answered Question
Jul 16th, 2009
User Badges:

Does anyone have basic information on configuring Netflow on routers/swtiches? We have several customer asking requeting us to send traffic to different destination servers. My curcuit is already at 75%. Will Netflow cause more bandwdith problem?

Correct Answer by Jon Marshall about 7 years 8 months ago

David


Here is the getting started configuration guide for Netflow on IOS routers -


http://www.cisco.com/en/US/docs/ios/netflow/configuration/guide/get_start_cfg_nflow_ps6350_TSD_Products_Configuration_Guide_Chapter.html


Catalyst switches do things in hardware so not all support Netflow, depends on your switch models.


Netflow does add to the bandwidth obviously but it should not overload your link. It will also increase the use of resources on your devices so be aware of that as well.


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Thu, 07/16/2009 - 09:07
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

David


Here is the getting started configuration guide for Netflow on IOS routers -


http://www.cisco.com/en/US/docs/ios/netflow/configuration/guide/get_start_cfg_nflow_ps6350_TSD_Products_Configuration_Guide_Chapter.html


Catalyst switches do things in hardware so not all support Netflow, depends on your switch models.


Netflow does add to the bandwidth obviously but it should not overload your link. It will also increase the use of resources on your devices so be aware of that as well.


Jon

Actions

This Discussion