ISDN BRI problem

Unanswered Question
Jul 17th, 2009

I have 4 port ISDN BRI and the configuration follow attache. I try to call between site and the ISDN BRI its work only 3 port of 4 port. Currently ISDN working I use command "debug dialer" and test call by command

"isdn test call interface bri 0/0/2 073224017"

the debug show like this

==================================

AAA#isdn test call interface brI 0/0/2 073224017

AAA#

*Jul 17 09:51:43.771: BR0/0/2 DDR: Attempting to dial 073224017

AAA#

*Jul 17 09:51:52.695: BRI0/0/2: wait for isdn carrier timeout, call id=0x8276

AAA#

*Jul 17 09:51:58.499: BR0/0/2 DDR: rotor dialout [best] least recent failure is also most recent failure

*Jul 17 09:51:58.499: BR0/0/2 DDR: rotor dialout [best] also has most recent failure

*Jul 17 09:51:58.499: BR0/0/2 DDR: rotor dialout [best]

*Jul 17 09:51:58.499: BR0/0/2 DDR: Attempting to dial 1899

*Jul 17 09:51:58.839: BRI0/0/2: wait for isdn carrier timeout, call id=0x8277

AAA#

*Jul 17 09:52:28.499: BR0/0/2 DDR: rotor dialout [best] least recent failure is also most recent failure

*Jul 17 09:52:28.499: BR0/0/2 DDR: rotor dialout [best] also has most recent failure

*Jul 17 09:52:28.499: BR0/0/2 DDR: rotor dialout [best]

*Jul 17 09:52:28.499: BR0/0/2 DDR: Attempting to dial 1899

*Jul 17 09:52:28.899: BRI0/0/2: wait for isdn carrier timeout, call id=0x8278

======================================

Please advise,How can I make ISDN work fully 4 port.

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ph0kiszar Fri, 07/17/2009 - 02:31

When I debug isdn q931 then use "isdn test call interface bri 0/0/2 073224017"

=======================================

AAA#isdn test call interface bri 0/0/2 073224017

AAA#

*Jul 17 10:27:28.871: ISDN BR0/0/2 Q931: RX <- DISCONNECT pd = 8 callref = 0xC3

Cause i = 0x829F - Normal, unspecified

*Jul 17 10:27:28.875: ISDN BR0/0/2 Q931: TX -> RELEASE pd = 8 callref = 0x43

Cause i = 0x809F - Normal, unspecified

*Jul 17 10:27:28.919: ISDN BR0/0/2 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xC3

*Jul 17 10:27:29.595: ISDN BR0/0/2 Q931: Sending SETUP callref = 0x0044 callID = 0x82BF switch = basic-net3 interface = User

AAA#

*Jul 17 10:27:29.599: ISDN BR0/0/2 Q931: TX -> SETUP pd = 8 callref = 0x44

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x81

Preferred, B1

Called Party Number i = 0x80, '073224017'

Plan:Unknown, Type:Unknown

*Jul 17 10:27:29.647: ISDN BR0/0/2 Q931: RX <- CALL_PROC pd = 8 callref = 0xC4

Channel ID i = 0x89

Exclusive, B1

AAA#

*Jul 17 10:27:38.543: ISDN BR0/0/2 Q931: RX <- DISCONNECT pd = 8 callref = 0xC4

Cause i = 0x8492 - No user responding

*Jul 17 10:27:38.547: ISDN BR0/0/2 Q931: TX -> RELEASE pd = 8 callref = 0x44

Cause i = 0x8092 - No user responding

*Jul 17 10:27:38.591: ISDN BR0/0/2 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xC4

=======================================

PS. the number 1899 its just a huntgroup of 4 ISDN telephone number that I have.

Actions

This Discussion