07-17-2009 04:34 AM - edited 03-15-2019 07:00 PM
Is there any method that I installed V WIC2-2MFT-E1 on 2801 router and test, whether ports are working ?
Any help will be appreciated.
Thanks
07-17-2009 05:02 AM
Hi,
You could use a T1 crossover cable to connect one port to the other (or back to back to another router), and configure the PRIs with one side emulating the network side and the other the user side, and then send a call through.
Regards,
Michael.
07-17-2009 05:55 AM
Do you mean,
cross/cable
IP-phone--CM---2801<----------->2811
Do you mean like that or if can give me simple senario
thanks
07-17-2009 07:26 AM
An example of simple scenario:
IP-Phone--CME--2801<--->2811--CME--IP-Phone
Make one side user and other network as described here:
http://www.cisco.com/en/US/docs/ios/12_1t/12_1t3/feature/guide/dt_q931.html
Regards,
Michael.
07-20-2009 03:37 AM
Thanks Micheal.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: