Snmp Config

vishwancc · ‎07-17-2009

Hi ALL:

I am facing a very peculiar issue with SNMP.

Every thing workfine when i put

snmp-server group snmpgroup v3 auth in the running config and save it but once the

switch get reloaded i see this in the running config and my NMS tool do not show that the

router is up.

Any idea why is this happening

snmp-server group snmpgroup v3 auth read notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF

snmp-server group snmpgrp v3 auth

groupname: snmpgrp security model:v3 auth

readview :v1default writeview: <no writeview specified>

notifyview: <no notifyview specified>

row status: active

groupname: snmpgroup security model:v3 auth

readview :<no readview specified> writeview: <no writeview specified>

notifyview: *tv.FFFFFFFF.FFFFFFFF.FFF

row status: active

Chao

Vishwa

carenas123 · ‎07-24-2009

Try to reconfigure your SNMP configuration. And try. If still you are getting same problem then only solution is to upgrade it and use some other NMS tool.

vishwancc · ‎07-26-2009

After doing a lot of research i was able to resolve the issue.

I found that the string is present in the SNMP view internet.

So i excluded the string form the view and after doing that evry thing worked fine.

I dont know what all the command did when i removed it but the issue is resolved.

Before

show snmp view

v1default iso - included volatile active

v1default internet.6.3.15 - excluded volatile active

v1default internet.6.3.16 - excluded volatile active

v1default internet.6.3.18 - excluded volatile active

notifyview internet - included nonvolatile active

*tv.FFFFFFFF.FFFFFFFF.FFFFFFFF internet - included volatile active

snmp-server view notifyview internet excluded.

After

sh snmp view