privilege level access on CATOS

josephp · ‎07-17-2009

Hello folks. I need a little help. I'm trying to set up different privilege level access on my switches. I found out that 1 switch is running CATOS I don't know the command or if it is even possible to set it up. Please help.

--------------------

username admin privilege 0 password 0 test

privilege exec level 0 terminal lenght 0

privilege exec level 0 show interfaces

________________

Thanks,

JP

Lucien Avramov · ‎07-17-2009

This could be accomplished on IOS, but there is no equivalent way to do this on CATOS.

You can use Command Authorization, which is possible only with tacacs+. You can use the cisco ACS server for that.

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a0080094ea4.shtml#f

The Catalyst has non-privileged (equivalent to '1') & privileged (equivalent to '15').

glen.grant · ‎07-18-2009

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/7.x/command/reference/set_f_l.html#wp1203836