Equipment Fail to Boot Alarm on TSC Card

ca_ingres · ‎07-17-2009

We have a 15600 SDH node and we got the following alarms:

1. Equipment Fail to Boot

2. Control Bus Failure

This is on the same TSC card on Slot 10.

Any thoughts?

Thanks

htarra · ‎07-24-2009

Both are in the TSC card.

An Equipment Boot Failure alarm occurs when a TSC card, SSXC card, or traffic (STM-N) card does not fully boot from the restart point after self-rebooting three times.

An Inbound Interconnection Control Bus 1 Failure on the TSC card, CXC card, or traffic (STM-N) cards occurs when one or more cards in the shelf experiences a control bus communication problem with the TSC card in Slot 10.

To Clear the EQPT-BOOT and control bus failure Alarm click this link.

http://www.cisco.com/en/US/products/hw/optical/ps4533/prod_troubleshooting_guide_chapter09186a00801f71a2.html#wp565128