Unity 4.2.1 Bulk Edit

Answered Question

Is it possible to bulk edit the cos setting on a subscribers profile?

Correct Answer by Rob Huffman about 7 years 7 months ago

Hi Daniel,


This cannot be changed via Bulk Edit, but you can use the method shown below :)


To Assign or Reassign Subscribers to a Class of Service



--------------------------------------------------------------------------------


Step 1 In the Cisco Unity Administrator, go to any Subscribers > Class of Service page.


Step 2 Click the Find icon.


Step 3 Double-click the name of the class of service to which subscribers are currently assigned.


Step 4 Go to the Subscribers > Class of Service > Subscribers page.


Step 5 Click Assign or Reassign, as applicable.


Step 6 Enter the name of a subscriber. You also can enter * for a list of all subscribers, or enter one or more characters followed by * to narrow your search.


Step 7 Click Find.


Step 8 From the list provided, select the names of the subscribers to be assigned or reassigned. To select more than one name, hold down the Ctrl or Shift key.


Step 9 Do one of the following actions, as applicable:


•Click the Assign button.


•Select the applicable class of service, and then click the Reassign button.



http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/administration/guide/ex/5xcusag170e.html#wp1048475



Hope this helps!

Rob


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Sat, 07/18/2009 - 09:52

Hi Daniel,


This cannot be changed via Bulk Edit, but you can use the method shown below :)


To Assign or Reassign Subscribers to a Class of Service



--------------------------------------------------------------------------------


Step 1 In the Cisco Unity Administrator, go to any Subscribers > Class of Service page.


Step 2 Click the Find icon.


Step 3 Double-click the name of the class of service to which subscribers are currently assigned.


Step 4 Go to the Subscribers > Class of Service > Subscribers page.


Step 5 Click Assign or Reassign, as applicable.


Step 6 Enter the name of a subscriber. You also can enter * for a list of all subscribers, or enter one or more characters followed by * to narrow your search.


Step 7 Click Find.


Step 8 From the list provided, select the names of the subscribers to be assigned or reassigned. To select more than one name, hold down the Ctrl or Shift key.


Step 9 Do one of the following actions, as applicable:


•Click the Assign button.


•Select the applicable class of service, and then click the Reassign button.



http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/administration/guide/ex/5xcusag170e.html#wp1048475



Hope this helps!

Rob


Actions

This Discussion