Port forwarding issue

Unanswered Question
Jul 18th, 2009

IOS: 12.4(22)YB/ CME 7.1

I used CCA 2.0.1 for initial config.

I can't seem to get port forwarding working...anyone see what I am missing?

Do you have to specifiy "ip routing"?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Steven DiStefano Mon, 07/20/2009 - 07:10

I just used CCA 2.0.1 to configure a NAT for port 1024 coming in on FE0/0 to map to 1024 (TCP) on an inside 192.168.10.x address on my 12.4(20)T2 system and I am able to get in and use the application.

I see the same commands as you shared in your config:

ip nat inside source list 1 interface FastEthernet0/0 overload
ip nat inside source static tcp 1024 interface FastEthernet0/0 1024


access-list 1 remark SDM_ACL Category=2
access-list 1 permit
access-list 1 permit
access-list 1 permit

Are you sure your terminal server is ready to receive connections?   Can you forward to a different application to rule that out?

Steven Smith Mon, 07/20/2009 - 07:34

Are you trying to forward TCP 3389?  Or is it something else you are trying to forward?


This Discussion