Giuseppe Larosa Sun, 07/19/2009 - 09:07
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Ronald,

there is for sure an HW related error during power on self test:

>> POST: Inline Power Controller Tests : Begin

POST: Inline Power Controller Tests : End, Status Failed

then later there are SW errors like

0:00:12: -Traceback= 5607F4 560A38 561218 1E41D4 1E428C 12457C 124748 1ED39C

00:00:13: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error: call = ifs_read_until (header) / file = / code = 21 (Is a directory) / bytes transfered = -1

Being the IOS image quite old I would try an upgrade if the system is not stable you need to force it into rommonitor (like for password recovery pressing the mode button in first seconds after power on ) and then your option is to use xmodem to download a new image on the flash.

Hope to help


Leo Laohoo Sun, 07/19/2009 - 18:35
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

I think you need to contact Cisco TAC and have the appliance RMA-ed.


This Discussion