DDNS - CCA

Unanswered Question
Marcos Hernandez Mon, 07/20/2009 - 13:45

DDNS is not configurable today via CCA, but it is a committed feature for our next release, 2.1. Stay tuned.

Thanks,


Marcos

Based on the following config items, where do I put my dyndns.org username and password?

! Define the DDNS global settings

ip domain lookup source-interface FastEthernet0/0

ip domain name dyndns.org

!

ip ddns update method method1

http

add

! As there is a “?” in the CLI – there will be an error if you copy / paste this line as is. You need to

! first paste the CLI before the “?”, then hit “Ctrl +V”, type ? and then paste the rest of the CLI

http://uc520multi:[email protected]/nic/update?system=dyndns&hostname=[email protected]/nic/update?system=dyndns&hostname=&myip=

interval maximum 2 0 0 0

interval minimum 1 0 0 0

!

Configure WAN interface for DDNS and VPN

interface FastEthernet0/0

description $FW_OUTSIDE$

ip dhcp client update dns

ip ddns update hostname SANJOSE-UC520.dyndns.org

ip ddns update method1

ip address dhcp

ip access-group 104 in

ip nat outside

ip inspect SDM_HIGH out

ip virtual-reassembly

duplex auto

speed auto

Actions

This Discussion