cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3609
Views
0
Helpful
3
Replies

DDNS - CCA

jcarter
Level 4
Level 4

Is there a way to setup DDNS for a UC500 using the CCA?

3 Replies 3

DDNS is not configurable today via CCA, but it is a committed feature for our next release, 2.1. Stay tuned.

Thanks,


Marcos

Based on the following config items, where do I put my dyndns.org username and password?

! Define the DDNS global settings

ip domain lookup source-interface FastEthernet0/0

ip domain name dyndns.org

!

ip ddns update method method1

http

add

! As there is a “?” in the CLI – there will be an error if you copy / paste this line as is. You need to

! first paste the CLI before the “?”, then hit “Ctrl +V”, type ? and then paste the rest of the CLI

http://uc520multi:cisco123@members.dyndns.org/nic/update?system=dyndns&hostname=cisco123@members.dyndns.org/nic/update?system=dyndns&hostname=&myip=

interval maximum 2 0 0 0

interval minimum 1 0 0 0

!

Configure WAN interface for DDNS and VPN

interface FastEthernet0/0

description $FW_OUTSIDE$

ip dhcp client update dns

ip ddns update hostname SANJOSE-UC520.dyndns.org

ip ddns update method1

ip address dhcp

ip access-group 104 in

ip nat outside

ip inspect SDM_HIGH out

ip virtual-reassembly

duplex auto

speed auto

Hi Jason,


The following document has some configuration examples and the full description of the DDNS feature in IOS:

http://www.cisco.com/en/US/partner/docs/ios/ipaddr/configuration/guide/iad_ddns_ps6441_TSD_Products_Configuration_Guide_Chapter.html

Thanks,


Marcos

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: