Very Urgent !!!!!!!!!!! SNMP Enable on IP Phone

Unanswered Question
Jul 21st, 2009
User Badges:

Dear all.

I am using Cisco 7931 & 7911 IP Phone with CCM 6.1 in my IPT Network.

I want to monitor all IP Phones through NMS. But for that Could not find any option for enable the SNMP on IP Phone.


Any body can help me for resolve this problem.its very Urgent...



Thanks & Regards

Madhab

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Michael Owuor Wed, 07/22/2009 - 18:58
User Badges:
  • Cisco Employee,

One can get SNMP traps pertaining to the phones by configuring and monitoring the CUCM node and leveraging the CISCO-CCM-MIB.


One of the traps defined for CUCM is ccmPhoneStatusUpdate which provides notification if there is at least one entry in the ccmPhoneStatusUpdateTable, which keeps track of the registration status of the phones.


http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=ccmPhoneStatusUpdateTable


More information about monitoring the health of the system is available in th CUCM Managed Services Guide:


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/ManagedServices.html


Hope this helps.


Regards,

Michael.

Actions

This Discussion