07-22-2009 08:50 AM
Hello everybody,
I've run into a very odd problem. I am unable to copy anything (configs, or binaries) from my router (a 2801) to a TFTP server. I get timed out every time.
I've verified network connectivity, there are no firewalls blocking it, and the service is running properly. As a side note, I am able to save my config from a 3550 switch sitting on the same network to the same TFTP server...with no problem. This only occurs with my 2801 router.
Any guidance would be helpful!
Thanks,
Sean
07-22-2009 09:14 AM
Check your access-lists on the 2801
Try to use ftp as a workaround.
There is a communication issue somewhere.
07-22-2009 02:50 PM
Hi Sean,
Did you enable TFTP in your router?
conf t
tftp flash:
end
07-22-2009 06:23 PM
You dont need this if you copy from the router to the server.
You would need it if the router is the tftp server
07-22-2009 06:23 PM
You dont need this if you copy from the router to the server.
You would need it if the router is the tftp server
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: