Solved: Cisco Mibs with traps defined

srego4 · ‎07-22-2009

Can anyone let me know (or provide a link) for some of the cisco mibs (with traps defined in them) for cisco 3845 routers and 6500's.

thks

Martin Ermel · ‎07-23-2009

perhaps this link has what you are looking for:

ftp://ftp.cisco.com/pub/mibs/traps/

View solution in original post

Lucien Avramov · ‎07-22-2009

the command show snmp mib on IOS should provide you with this information.

srego4 · ‎07-22-2009

thks. However, is there any way I can find out or single out the ones which have 'traps defined' in them, without having to open / read them ?

Lucien Avramov · ‎07-22-2009

the command : snmp-server enable traps ? will list you all the possible traps for snmp to be sent from the device

srego4 · ‎07-22-2009

hi,

sorry i prob. am not making myself clear.

What I am trying to do is to import mibs into a management software trap manager. However, I only need / want the mibs that already have the traps defined in them - that way my mangement software will be able to translate the traps into meaningful messages.

Lucien Avramov · ‎07-22-2009

use this link :

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml

bilousand · ‎07-22-2009

If you already getting traps you can search by OID in which MIB they're defined with http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en

srego4 · ‎07-22-2009

thks bilousand,

i had tried that link. but i'll try it again.

Martin Ermel · ‎07-23-2009

perhaps this link has what you are looking for:

ftp://ftp.cisco.com/pub/mibs/traps/

srego4 · ‎07-23-2009

BINGO!!

thanks mermel.