Trouble logging into a wlan 1240 mbssid

Unanswered Question

Hi there


I have some trouble logging into the configured SSIDs on a 1240.


I can see all the SSID's, but I can't login. On Windows, it "just" times out, on Mac, I get the message: "...talk to your administrator". I can't see any obvious thing in the config (find attached).


I configured 2 SSID's, each with a different VLAN. I want the AP to broadcast / announce both of them. I'll do a 3rd, which I want to broadcast as wel, but this one will have radius authentication (against WIndows Domain).


Andre


Any Help is highly appreciated. Thanks a lot in advance.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Robert.N.Barrett_2 Thu, 07/23/2009 - 10:59
User Badges:
  • Bronze, 100 points or more

I don't see anything obvious in the config (assuming you are configuring your clients to use WPA with the proper PSK). Why not temporarily remove all encryption/security to just make sure you're not having any VLAN/DHCP issues?


Actions

This Discussion