Flex Links

Unanswered Question
Jul 23rd, 2009
User Badges:

Hello,


I want to implement a backup link between switches, one link will connect the switches directly and the backup link will connect the switches through a switch and two AP's. Because of design reasons, I can't enabling STP.

I'm looking for something similar to Flex Links, but, to use Flex Links, the 2960 switch must be running the LAN Base Image, and the switches that I want to configure are running the LAN Lite Image.


Do you know something similar to Flex Links that I can use with Catalyst 2960 Lan Lite image switches?


Thanks in advance.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Thu, 07/23/2009 - 20:54
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Cesar,

>> Do you know something similar to Flex Links that I can use with Catalyst 2960 Lan Lite image switches?


Unfortunately no.

I would consider if STP can be used but you have already checked this.


So I would suggest an upgrade to LAN base image.


Hope to help

Giuseppe


iyde Thu, 07/23/2009 - 23:31
User Badges:
  • Silver, 250 points or more

Upgrading from LAN Lite to LAN Base is equal to hardware replacement :-(

Giuseppe Larosa Thu, 07/23/2009 - 23:48
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Ingolf,

I see but if STP cannot be used what option is left to manage a L2 redundant topology ?

it should keep shut the secondary link and manually try to enable it when primary fails and then when primary link is restored what happens ?


Hope to help

Giuseppe


Actions

This Discussion