Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
263
Views
0
Helpful
1
Replies

Invalid CLID on phone with CFA

shirazehba
Level 1
Level 1

‎07-23-2009 04:28 AM - edited ‎03-15-2019 07:05 PM

IP phone DN=511 with external phone number mask 0408515511

When this phone makes an outside call the external mask is displayed correctly.

When IP phone 511 has a CFA to an external destination the external mask is not send, only the DN=511 is send to the PSTN.

ISDN Q931 debug:

Sending Complete

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA9839D

Exclusive, Channel 29

Progress Ind i = 0x8083 - Origination address is non-ISDN

Calling Party Number i = 0x0081, '511'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '0402582911'

Plan:Unknown, Type:Unknown

11:17:36.256 Netherl: ISDN Se0/3/0:15 Q931: RX <- CALL_PROC pd = 8 callr

The phone mask and route patterns are working as they should when we make a direct call from the IP phone. However when we set a CfA on the phone only the internal DN is send to the PSTN. The provider overwrites this to the 10 digit main number.

Labels:
0 Helpful
1 Reply 1

yatian
Level 1
Level 1

‎07-24-2009 09:53 PM

Please check the digit translation for calling party number in Forward CSS(configured in DN page) is configured accordingly.

Or, you can change the value of "Calling Party Selection" on VG configure page to slove your problem.

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents