07-23-2009 05:33 AM - edited 03-15-2019 07:05 PM
I have a 2811 with a vwic and a WAN card. I currently can not configure sessions for hardware conference bridging because I have insufficient DSP modules (I only have 1 PVDM2-16). I would like to buy a PVDM2-32, can this module be installed to work in conjunction with the current module to have a combined 48 channels?
Solved! Go to Solution.
07-23-2009 05:48 AM
Yes, no problem.
07-23-2009 06:00 AM
Hi Shikamaru,
Hope all is well buddy,
Yes, you would be good to go here :)
Cisco 2800 Series Integrated Services Routers
Check out Table 7 for the 2811;
PVDM (DSP) Slots on Motherboard = 2
or use
DSP Calculator in the following link:
http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl
Hope this helps!
Rob
Edit: Christopher, you have trumped my hapless typing skills :) + 5 points, sorry for the duplication.
07-23-2009 05:48 AM
Yes, no problem.
07-23-2009 06:00 AM
Hi Shikamaru,
Hope all is well buddy,
Yes, you would be good to go here :)
Cisco 2800 Series Integrated Services Routers
Check out Table 7 for the 2811;
PVDM (DSP) Slots on Motherboard = 2
or use
DSP Calculator in the following link:
http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl
Hope this helps!
Rob
Edit: Christopher, you have trumped my hapless typing skills :) + 5 points, sorry for the duplication.
07-23-2009 06:06 AM
Thanks, Rob. Much appreciated as always. How's the weather up there :)
07-23-2009 06:09 AM
Hey Buddy,
No worries my friend! We have been having our best weather all year, the last week has been averaging +30c. Of course, now that I'm back to work, after my 10 day (rainy) break.
That's life for you ;-)
Cheers!
Huff
07-23-2009 07:29 AM
Thanks again, Rob. Ordered the PVDMs this morning, much appreciated.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: