Configure 2811 as transcoding device

Unanswered Question
Jul 23rd, 2009
User Badges:

HI Guys,


I need your help on this..I have a customer going to install CUCM solution on multiple site.. because of bandwidth limitation some sites will be running G729 over wan and some sites are running G711.... How do i configure a cisco 2811 router which has PVDM 64 installed in it as a trancoding device..


In esence i want sites running G711 and sites running G729 talk to each other and enjoy other fancy features like conference.


Thanks in advance


regards


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Tue, 07/21/2009 - 04:16
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html


CallManager and IOS Gateway DSP Farm Configuration Example

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml



HTH


java


if this helps, please rate

amitpalsinghbatra Thu, 07/23/2009 - 15:00
User Badges:

Hello my friend.


Thanks a lot for your reply.. I forgot to mention that we are using call manager 7.0 version..1 publisher and 3 subscriber servers...does this configuration still valid for my solution or configuration for transcoding will change ??


regards


Jaime Valencia Thu, 07/23/2009 - 18:10
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

It still works, the interface of 2nd link is just a little changed but all the IOS commands are exactly the same for any version.


HTH


java


if this helps, please rate

Actions

This Discussion