ACS Secondary doesn't authenticate

Answered Question
Jul 23rd, 2009

I've setup a secondary ACS, database replication works properly.

But when I try to use secondary ACS server to authenticate user, I can't authenticate successfully.

In Reports and Activity (in secondary ACS), it doesn't appear anything.

In primary ACS, il failed attempts, I can see an "Unknown NAS" from the ip address of the secondary ACS, it seems that secondary try to use primary to authenticate...

Where I'm wrong?

Thanks

Daniele

I have this problem too.
0 votes
Correct Answer by Jagdeep Gambhir about 7 years 6 months ago

Hi Daniele,

That is due to proxy setting on the Secondary acs. On secondary acs please go to acs-->network configuration -->proxy dis table---> Bring your secondary acs under forward to box.

That should fix it.

Regards,

~JG

Do rate helpful posts

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
andrewswanson Wed, 07/29/2009 - 06:01

are you replicating "Network Configuration Device tables" between the two ACS and do your AAA clients appear ok in the Network Configuration section of the second ACS?

hth

andy

ps what ver of ACS?

dimensyssrl Thu, 07/30/2009 - 01:31

>>are you replicating "Network Configuration Device tables" between the two ACS

yes, I'm replicating all configurations

>>do your AAA clients appear ok in the Network Configuration section of the second ACS?

yes, they appear

ps what ver of ACS?

3.2

Thanks

Daniele

Correct Answer
Jagdeep Gambhir Wed, 07/29/2009 - 08:30

Hi Daniele,

That is due to proxy setting on the Secondary acs. On secondary acs please go to acs-->network configuration -->proxy dis table---> Bring your secondary acs under forward to box.

That should fix it.

Regards,

~JG

Do rate helpful posts

Actions

This Discussion