Leo Laohoo Fri, 07/24/2009 - 18:35
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

One way to verify is to do a post-installation WLAN site survey.

mat.edwards Fri, 07/24/2009 - 23:11
User Badges:

At greater height e.g 10m you will notice that the coverage below the AP isn't very strong and you will receive a lower RSSI for a greater distance, i.e around -65 to -70dBm.


I have seen 1728 antennas installed at 15m high with poor coverage. I would advise not to mount the antennas above 10m, try using lower gain omni antenna for better coverage if installed at height e.g 2.2dBi 1941. These provide more of a 'true' omni-directional radiation pattern so you get better coverage above and below where 1728 squash the coverage above and below to increase the distance that they can cover, therefore reducing effectiveness when installed high.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode