This are some shows from one of the Routers
R-VOCE-E7-SPLAI#sh controllers e1
E1 0/2/0 is up.
Applique type is Channelized E1 - balanced
Cablelength is Unknown
Description: ## Romtelecom 1 ##
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20080918, FPGA: 13, spm_count = 0
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
Data in current interval (744 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
51 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
51 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
33352 Line Code Violations, 32 Path Code Violations,
5854 Slip Secs, 1 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins,
5854 Errored Secs, 0 Bursty Err Secs, 2 Severely Err Secs, 268 Unavail Secs
E1 1/0 is up.
Applique type is Channelized E1 - balanced
Description: ## Romtelecom 2 ##
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20080918, FPGA: 255, spm_count = 0
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
Current port master clock:recovered from backplane
Data in current interval (748 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
51 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
51 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
15022 Line Code Violations, 16 Path Code Violations,
5872 Slip Secs, 1 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins,
5872 Errored Secs, 0 Bursty Err Secs, 2 Severely Err Secs, 13 Unavail Secs
E1 1/1 is up.
Applique type is Channelized E1 - balanced
Description: Description: ## Vodafone 1 ##
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20080918, FPGA: 255, spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
Current port master clock:recovered from backplane
Data in current interval (748 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
51 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
51 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 11 Path Code Violations,
5873 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
5873 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
R-VOCE-E7-SPLAI# sh net
R-VOCE-E7-SPLAI# sh netwo
R-VOCE-E7-SPLAI# sh network-clocks
Network Clock Configuration
---------------------------
Priority Clock Source Clock State Clock Type
11 Backplane GOOD PLL
Current Primary Clock Source
---------------------------
Priority Clock Source Clock State Clock Type
11 Backplane GOOD PLL
R-VOCE-E7-SPLAI#sh run | i clock
clock timezone EET 2
clock summer-time EEST recurring last Sun Mar 2:00 last Sun Oct 4:00
network-clock-participate slot 1
network-clock-participate wic 2
I do have some slips. I don't know if that is too much and if that number of slips affects my fax communciations.
I have 3 E1's on this router from two diffrent providers, with each line getting the clock from the provider. What will the 'network-clock-select' command will do?
I am now downloading 12.4(15)T9 for my VGs and Routers and will come back with a reply as soon as possible(as soon as the client allows me to reload).
