Changing IP's on ACS for Windows

Answered Question
Jul 28th, 2009
User Badges:

Is there any special requirements when you have to change the IP address of the Cisco ACS for Windows server ?

Correct Answer by Jagdeep Gambhir about 7 years 11 months ago

Florrie,

Please mark this thread resolved so other can benefit.



Regards,

~JG

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Collin Clark Tue, 07/28/2009 - 05:16
User Badges:
  • Purple, 4500 points or more

Nope, but you'll have to change all your devices that point to it for authentication. We put ours behind load balancers so we don't ever have to change the IP's for RADIUS.


Hope that helps.

florrieford Tue, 07/28/2009 - 05:22
User Badges:

Many thanks for that, we are going to put the new I as the secondary TACACS statement in the config that way we can back out if we need to.


Many thanks


Jon

florrieford Tue, 07/28/2009 - 22:46
User Badges:

Colin

Once the IP address of the server has been changed for the NIC, will ACS pick it up or do you have to change it in the registry ? Or is it tied to the license ?

Many thanks


Florrie

Collin Clark Wed, 07/29/2009 - 05:05
User Badges:
  • Purple, 4500 points or more

AFAIK neither, it's tied to the IP of the server.

Jagdeep Gambhir Wed, 07/29/2009 - 06:45
User Badges:
  • Red, 2250 points or more

Hi Florrie,

You need to manually add that IP in acs under aaa-server.




Regards,

~JG

Collin Clark Wed, 07/29/2009 - 06:50
User Badges:
  • Purple, 4500 points or more

Good one Jagdeep, I forgot about that.

florrieford Wed, 07/29/2009 - 07:49
User Badges:

Jagdeep


Many thanks for pointing that out.


Much appreciated


Cheers


Florrie

Correct Answer
Jagdeep Gambhir Wed, 07/29/2009 - 08:09
User Badges:
  • Red, 2250 points or more

Florrie,

Please mark this thread resolved so other can benefit.



Regards,

~JG

Actions

This Discussion