cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
964
Views
0
Helpful
8
Replies

Changing IP's on ACS for Windows

florrieford
Level 1
Level 1

Is there any special requirements when you have to change the IP address of the Cisco ACS for Windows server ?

1 Accepted Solution

Accepted Solutions

Florrie,

Please mark this thread resolved so other can benefit.

Regards,

~JG

View solution in original post

8 Replies 8

Collin Clark
VIP Alumni
VIP Alumni

Nope, but you'll have to change all your devices that point to it for authentication. We put ours behind load balancers so we don't ever have to change the IP's for RADIUS.

Hope that helps.

Many thanks for that, we are going to put the new I as the secondary TACACS statement in the config that way we can back out if we need to.

Many thanks

Jon

Colin

Once the IP address of the server has been changed for the NIC, will ACS pick it up or do you have to change it in the registry ? Or is it tied to the license ?

Many thanks

Florrie

AFAIK neither, it's tied to the IP of the server.

Hi Florrie,

You need to manually add that IP in acs under aaa-server.

Regards,

~JG

Good one Jagdeep, I forgot about that.

Jagdeep

Many thanks for pointing that out.

Much appreciated

Cheers

Florrie

Florrie,

Please mark this thread resolved so other can benefit.

Regards,

~JG

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: