07-28-2009 06:33 AM - edited 03-18-2019 10:29 AM
Please Help. I have a CME 4.1 and the below translation profile with rules. I am tring to get the thing to take any called number coming to me on the SIP trunk to translate any extension that begins with 9 and change it to a 3. So xxx xxx 9xxx would be xxx xxx 3xxx and then send it to the CME. For some reason it won't allow the call down. Of course, when the user calls out, and it changes it to a 9 (supposedly) the call goes out pots.
Anyone... Please help!
voice translation-profile Incoming_Change_93
translate called 5
voice translation-rule 5
rule 1 /^2142909\(...$\)/ /2142903\1/
voice translation-profile Outgoing_Change_39
translate called 6
voice translation-rule 6
rule 1 /3.../ /2142909\1/
07-28-2009 06:48 AM
You need to apply the translation-profile into the relevant DP. Note rule 5 can be written more concisely as:
rule 1 /^2142909/ /2142903/
07-28-2009 06:59 AM
Aye, I applied it, but does CME change these for outgoing SIP VOIP peers? it doesn't do right.
What about the outgoing? from 3... to the /3.../ /214290\(9...)/ ? That doesn't seem to work on outgoing and the SIP trunk rejects it...
Thanks again for your help!
07-28-2009 07:11 AM
Please note that I am changing it from a 2142909... to the internal extension and ringing the user at 3...
07-28-2009 07:19 AM
All what matter is that you have the profile applied to the right DP. That you may have missed. Your need is done with:
rule 1 /^2142909/ /3/
07-28-2009 07:22 AM
Yeah. But when I send the call up the SIP, it needs to go back from 3... to the 2142909....
That is where the trick comes in, I believe.
07-28-2009 08:05 AM
Can anyone help me translate this from a 3... to a 2142909... ?
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide