Confirming this output means I have no media on interface?

Answered Question
Jul 28th, 2009

Folks, if I see on 'show int status'the info pasted below, it means I have no media (fiber or copper port) to plug my cable into this g0/1 switchport, right?



switch#show int status

Name Status Vlan Duplex Speed Type

gi0/1 notconnect 1 auto auto uknown


Device:2950G

Correct Answer by Giuseppe Larosa about 7 years 7 months ago

Hello Marlon,

it could mean the switch cannot recognize the GBIC module or that no Gbic module is inserted.


Hope to help

Giuseppe




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Giuseppe Larosa Tue, 07/28/2009 - 08:03

Hello Marlon,

it could mean the switch cannot recognize the GBIC module or that no Gbic module is inserted.


Hope to help

Giuseppe




Leo Laohoo Tue, 07/28/2009 - 14:34

... or your GBIC could either be faulty or not supported possibly because it's not Cisco (3rd party).

Actions

This Discussion