Here is the IC_Server.log. I trimmed out everything prior to inventory collection on this switch only.

Looks like a straight up timeout. In LMS 3.2 we start using SNMPv2c more than v1. We can still fallback to v1, but for this device, v2c should work.

Go to RME > Devices > Device Management > RME Devices > Edit Device Attributes, and edit the SNMP timeout for this device. Start with 10 seconds, and go up from there until inventory is successfully collected.

Joe, that did it - 10 seconds was enough. Thanks for your help.

Al Stiver