Location server

Unanswered Question
Jul 28th, 2009
User Badges:

Folks,

I just setup a location sever. went through the setup tool and setup the hostname and ip address, etc.


When i go to WCS and try to import the location server, it using account admin/admin and trying to connect at port 8001 to the location server by default.


In my case wcs fails to connect to locatin server, what can i do to fix the problem.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Lucien Avramov Tue, 07/28/2009 - 12:40
User Badges:
  • Red, 2250 points or more

What version of WCS and what version of location ?

Lucien Avramov Tue, 07/28/2009 - 13:08
User Badges:
  • Red, 2250 points or more

That is not compatible.


Latest version of location server (providing you mean 6.0.x) works with WCS : 6.0.132.0 or later only


Refer to the location server release notes to find a compatible version for WCS:

http://www.cisco.com/en/US/products/ps6386/prod_release_notes_list.html



WCS 3.0 (very old) works with Location 1.2.20.0, and nothing later than that.



NAVIN PARWAL Tue, 07/28/2009 - 21:39
User Badges:

I am running the following now and I get the same error, please help.


Version 4.2.128.0 - wcs server

3.1.43.0 -location server


NAVIN PARWAL Wed, 07/29/2009 - 01:45
User Badges:

The WCS is trying to connect to the location server using account admin/admin, and at port 8001, but can not connect with these credidentials, I can ping between the two and also can ssh into the location sever.

Lucien Avramov Wed, 07/29/2009 - 07:55
User Badges:
  • Red, 2250 points or more

-admin/admin are the default credentials, if you have a doubt, you want to re-run the setup from the installers folder


-Try with https instead of http and also make sure port 8001 is not blocked. Do a netstat -an on the location to make sure it's listening on those ports


-Delete and re add the location on WCS


Actions

This Discussion

 

 

Trending Topics - Security & Network