07-28-2009 02:06 PM
CW Contracts reporting reports the master SN. How can I pull all the SN for all devices in a 3750 stack for asset/inventory purposes?
07-28-2009 02:15 PM
show version (on the master)
07-28-2009 03:57 PM
Yes, that is the best way but I want to add that you can actually check most of the commands for a stack member itself.
From the master:
remote command
Example:
C3750-Stack#remote command 2 show ver
C3750-Stack#remote command 2 shoe boot
07-28-2009 06:41 PM
"sh ver" and look for "System serial number" line.
"sh inventory"
07-29-2009 05:32 AM
First, thanks to everyone that answered me, it feels effective when you get some kind of answer.
So, nothing in reports that can assist with inventory-ing serial numbers for equipment rather than loopback management.
I have built Netshow jobs that run sh ver | inc System serial and sh diag | inc PCB and in a large environment these are sloppy to parse.
I checked also Contract Status and these also just apply to the master serial.
Any other ideas?
11-23-2009 08:29 AM
kathegaj2 wrote:
First, thanks to everyone that answered me, it feels effective when you get some kind of answer.
So, nothing in reports that can assist with inventory-ing serial numbers for equipment rather than loopback management.
I have built Netshow jobs that run sh ver | inc System serial and sh diag | inc PCB and in a large environment these are sloppy to parse.
I checked also Contract Status and these also just apply to the master serial.
Any other ideas?
You need to create a Custom Report Template in RME Reports.
- Association : don't pick anything
- Inventory Group : Chassis
- Attribute : Chassis Serial Number
- Operator : Contains
- Value : All
Click "Add", then "Save Changes", then Finish.
Then you use your custom report on a selection of device (using Report Generator, Inventory, pick your custom template), and you should be good to go. I then export it to CSV for further editing, sorting, etc.
HTH.
Alex.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: