Cisco 2800 Router RAM Problem

Answered Question
Jul 29th, 2009
User Badges:

Hi,


Our 2800 router would not continue loading and when I connect to the router using hyper terminal this is the error "Bad RAM at location 0xA0000010: wrote 0xA0000010, read 0xA0020010".


Can somebody help what the error message means? And how can I fix it?


All answers are highly appreciated.


Thanks.


John

Correct Answer by Lucien Avramov about 7 years 9 months ago

Either you tried to add not supported RAM or more RAM that the 2800 can handle, either you have a RAM corruption for which TAC can send you an RMA unit in that specific case.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Lucien Avramov Wed, 07/29/2009 - 21:18
User Badges:
  • Red, 2250 points or more

Either you tried to add not supported RAM or more RAM that the 2800 can handle, either you have a RAM corruption for which TAC can send you an RMA unit in that specific case.


helios999 Thu, 07/30/2009 - 17:11
User Badges:

Thanks for the reply. Our supplier and working already for the replacement.

Actions

This Discussion