cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
548
Views
0
Helpful
2
Replies

RME Syslog Alert Issue

Hello,

I have created Syslog Automated Action to send me email alert when some message detected. For testing purpose i configured it to send me alert when link down is detected. After ensuring the test successful I deleted the action but the Syslog alert still sends me alert although I've deleted all the automated action except the 2 defaults one. I'm using RME V.4.1.1. I need help to know where i can manually delete the automated action.

Thanks

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

Deleting them through the GUI is the only way. You might try running the following commands to see if the alerts stop:

pdterm SyslogAnalyzer SyslogCollector

pdexec SyslogAnalyzer SyslogCollector

If not, post a sample alert that you are receiving.

View solution in original post

2 Replies 2

Joe Clarke
Cisco Employee
Cisco Employee

Deleting them through the GUI is the only way. You might try running the following commands to see if the alerts stop:

pdterm SyslogAnalyzer SyslogCollector

pdexec SyslogAnalyzer SyslogCollector

If not, post a sample alert that you are receiving.

Hi Joe,

Great, it solved my problem.

Thanks..

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco