We started looking at replacing our 3030's today and I got to the point to where we need to import all of our filters and rules from the 3030 into the 5550. I have 2 questions:
1. We checked the cisco site and found a document on conversion but it did not cover much with rules and filters. It just indicated that the ASA uses ACL's now. I looked at the ACL's but could not figure out how they related back to filters and rules like the 3030 has. Can someone explain this process?
2. Is there a way to do an "import" on the filters and rules to make this easy? We have tons of them.
As an example of what we are trying to do:
A contractor needs to VPN into our network and we want to allow him to only access a specific server.
In the VPN concentrator I would make a filter called "Contractor" and then make a rule allowing incoming access from him to the server and then outgoing access from the server to him. I would then apply this rule to the filter "Contractor". On my ACS server I would create another group called "ACSContractor". Under the properties of that group I would check the box for "filter-id" and then type in "Contractor". At this point they would be able to log in with this access.
Thanks in advance!