CM on dl320

Unanswered Question
Aug 1st, 2009
User Badges:


I am learning VOIP and truing to set up a lab , I found this server and I would like to install CM, my question is

can I do that ?

what CM Ver. do I need ?

what os needed to be install on dl320 before I install CM ?

any wite paper or how too for this platform ?


HP Proliant DL320 G2 Server

2.66 Xeon Processor

2x 80GB Harddrives (Can do raid 1 or 0)


Rackmountable 1U form factor

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Jaime Valencia Sat, 08/01/2009 - 15:17
User Badges:
  • Cisco Employee,
  • Hall of Fame,


This link contains the list of supported platforms

Supported Cisco Unified Communications Manager Releases by Server

What version you need depends on what you can get your hands on, i'd recommend at least 6.1(x), preferably 7.x but your server does not meet the 3 GHz requirement

OS is installed with CUCM, Windows version were a separate OS install from CCM.

Install is rather simple, load DVD and fill in the blanks. If you want to read something before, refer to install guides available on CCO



if this helps, please rate

cisco steps Sun, 08/02/2009 - 06:58
User Badges:

I am just going to stay w/ cisco equip for now. as newbie to the voice world. any idea for cheap routers that will support CM I know I need to get some type of voice gtwy to create the real scenario ..



This Discussion