CCME 4.0 issue and 7931 handsets

Unanswered Question
Aug 2nd, 2009

I have a site with 6 PSTN lines connected to FXO ports I can dial into each port ok but when the site attempts to make more then 2 calls out (from any handset) they get a fast busy tone.

There is no CoR etc tried to keep it basic.

Each phone has an individual extension and the reception phone has 2 line buttons for all the FXO ports to terminate on.

Config as below:

voice-port 0/0/0 to 0/0/1 and 0/2/0 to 0/2/3

trunk-group FXO-Group

supervisory disconnect dualtone mid-call

no vad

cptone AU

timeouts call-disconnect 2

timeouts wait-release 2

connection plar opx 99

impedance complex1

!

!

ephone-dn 20 dual-line

number 99

label Line

call-forward noan 19 timeout 30

no huntstop

!

!

ephone-dn 21 dual-line

number 99

label Line

preference 1

call-forward noan 19 timeout 30

no huntstop

!

!

ephone 6

device-security-mode none

mac-address 0023.5EB6.E97E

ephone-template 1

username "16" password 16

speed-dial 15 50

speed-dial 17 9120

speed-dial 18 9121

speed-dial 19 9122

paging-dn 25

type 7931

button 1:6 2:21 3:20 6m1

button 7m2 8m3 9m4 10m5

button 11m7 12m8 17m38 18m39

button 19m40

!

dial-peer voice 1 pots

trunkgroup FXO-Group

incoming called-number .

!

dial-peer voice 10 pots

trunkgroup FXO-Group

description ** Outgoing Call to PSTN **

preference 5

destination-pattern 0T

Any feed back would be great. thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
heathrw Mon, 08/03/2009 - 18:47

Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(15)T1,

Actions

This Discussion