08-02-2009 10:42 PM - edited 03-15-2019 07:11 PM
I have a site with 6 PSTN lines connected to FXO ports I can dial into each port ok but when the site attempts to make more then 2 calls out (from any handset) they get a fast busy tone.
There is no CoR etc tried to keep it basic.
Each phone has an individual extension and the reception phone has 2 line buttons for all the FXO ports to terminate on.
Config as below:
voice-port 0/0/0 to 0/0/1 and 0/2/0 to 0/2/3
trunk-group FXO-Group
supervisory disconnect dualtone mid-call
no vad
cptone AU
timeouts call-disconnect 2
timeouts wait-release 2
connection plar opx 99
impedance complex1
!
!
ephone-dn 20 dual-line
number 99
label Line
call-forward noan 19 timeout 30
no huntstop
!
!
ephone-dn 21 dual-line
number 99
label Line
preference 1
call-forward noan 19 timeout 30
no huntstop
!
!
ephone 6
device-security-mode none
mac-address 0023.5EB6.E97E
ephone-template 1
username "16" password 16
speed-dial 15 50
speed-dial 17 9120
speed-dial 18 9121
speed-dial 19 9122
paging-dn 25
type 7931
button 1:6 2:21 3:20 6m1
button 7m2 8m3 9m4 10m5
button 11m7 12m8 17m38 18m39
button 19m40
!
dial-peer voice 1 pots
trunkgroup FXO-Group
incoming called-number .
!
dial-peer voice 10 pots
trunkgroup FXO-Group
description ** Outgoing Call to PSTN **
preference 5
destination-pattern 0T
Any feed back would be great. thanks
08-03-2009 07:45 AM
Which exact IOS ?
08-03-2009 06:47 PM
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(15)T1,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide