08-03-2009 06:55 AM - edited 02-21-2020 03:36 AM
Good morning,
I have a really quick question. When enabling SSL VPN do I have to either choose between Clientless SSL or SSL VPN Client. IE, the portal with (CIFS, Telnet, Citrix) or the SSL full network access client.
It seems like it's one of the other from this doc, however I was thinking it would be nice to have the SSL VPN client with the option to click a link for full network access.
Any ideas?
Here's the document I referenced.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00806ea271.shtml
Best Regards,
JB
Solved! Go to Solution.
08-03-2009 01:45 PM
You can have clientless-only, clientless+anyconnect (click anyconnect link on the clientless portal), or anyconnect only. It all depends on how you configure the group-policy on the ASA.
Regards,
Roman
08-03-2009 01:45 PM
You can have clientless-only, clientless+anyconnect (click anyconnect link on the clientless portal), or anyconnect only. It all depends on how you configure the group-policy on the ASA.
Regards,
Roman
08-03-2009 01:52 PM
Sounds good, congrats on the 6th CCIE my friend!
JB
08-03-2009 01:52 PM
thank you, JB!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide