08-03-2009 08:15 AM - edited 07-03-2021 05:54 PM
Hi there;
I have a setup of 10 1522 APs (4 RAPs and 6 MAPs). Two of them (One RAP and one MAP) are placed bit away from the remaining ones. The two remote APs function correctly as desired (the remote MAP selects nearest RAP as parent) but when the RAP looses its ethernet connection due to wired network failure; the MAP joins a remote RAP with very low SNR and stays at it even when the desired RAP comes up again.
Is there any way we can set a priority that the MAP joins intended RAP as soon as it comes alive again?
Thanks,
Solved! Go to Solution.
08-03-2009 09:50 AM
The 1520's don't currently support background scanning. The result of this is the condition you described. Bug CSCsw28993 was filed to have background scanning added to the 1520's.
08-03-2009 09:50 AM
The 1520's don't currently support background scanning. The result of this is the condition you described. Bug CSCsw28993 was filed to have background scanning added to the 1520's.
08-03-2009 10:24 AM
Thanks a lot. It was really helpful
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide