08-03-2009 09:28 AM - edited 03-13-2019 06:33 PM
From the below quote from cisco to convert sip to sccp 7960, where cani find and edit the file OS79XX.TXT?
____________________________________
SIP Images 4.x/Earlier to SCCP Images 6.x/Later
If your current SIP images is 4.x or earlier, complete these steps in order to convert to the desired SCCP images 6.x or later:
Complete these steps in order to convert to the 6.3 image first:
Copy the desired binary image from Cisco.com to the root directory of the TFTP server.
Open the OS79XX.TXT file with a text editor and edit the file to include the desired image.
Specify the desired image in the protocol configuration files.
Reset each phone.
08-03-2009 09:36 AM
You don't need to do that.
Reset phone via long # at powerup, then 123456789*0#
Phone will look for term70.default.loads and associated files, make sure you have them on the CME router and configured tftp-server.
08-03-2009 10:07 AM
iam using cm6..
ive tried doing that but i couldnt see a flasshing mute,speaker and headset..
08-03-2009 10:13 AM
iam using cm6..
ive tried doing that but i couldnt see a flasshing mute,speaker and headset..
08-03-2009 10:18 AM
In OS79XX.TXT just put the image filename without extensions.
08-03-2009 10:21 AM
sorry but i dont know where to get this txt file
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: