show users command on cisco router

Answered Question
Aug 3rd, 2009
User Badges:
  • Bronze, 100 points or more

Hi everybody.


Let say we have a followng scenario:


pc------R1------R2- console-----User2

Let say a user zee telnets into R1 from pc.

While at R1, telnet into R2. Once at R2, zee suspends the telnet to R2 by using ctrl-shift 6 X, and goes back to R1 prompt i.e R1>.


Now if a user2 connects to R2 through console and use the command " show users" , will this command show the zee besides users2 in the output ?



thanks a lot.

Correct Answer by Jon Marshall about 7 years 9 months ago

Sarah


"Now if a user2 connects to R2 through console and use the command " show users" , will this command show the zee besides users2 in the output ?"


Yes it will.


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Mon, 08/03/2009 - 09:45
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Sarah


"Now if a user2 connects to R2 through console and use the command " show users" , will this command show the zee besides users2 in the output ?"


Yes it will.


Jon

Actions

This Discussion