08-04-2009 02:57 AM
Hi,
I have 3 WLC which i want to manage via CW but WLC shows as not supported.
08-04-2009 08:29 AM
Make sure you have the latest version of all of the RME 4.2 device packages, and make sure you have SNMPv1 enabled on the controller. By default, the controller only supports SNMPv2c, however, RME prior to 4.3 only used v1 when communicating with devices.
08-04-2009 09:18 AM
Does CiscoView have 4402 support now, that it didn't before?
08-04-2009 09:21 AM
No. I do not believe support is planned for the WLC for CiscoView.
08-27-2009 05:46 AM
Joe,
We are running RME 4.2. We have 4 WLCs. One running 6.0.182.0 & three running 5.2.157.0. I cannot get RME to inventory or archive any of the four. Please advise.
08-27-2009 08:58 AM
Please start a new thread for your issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide