Gateway type

Unanswered Question
Aug 4th, 2009
User Badges:
  • Bronze, 100 points or more

I have 2 GWs registered to GK.

When I do show gatekeeper endpoints, it lists both GWs, but the Type column is different.

One GW is shown as H323-GW, the other as VOIP GW. 1720 53681 gw1 H323-GW

H323-ID: [email protected] 1720 58117 gw2 VOIP-GW

H323-ID: [email protected]

Both GWs are configured identically( voip interface, voice service voip, gateway, similar dial peers, etc.)

GW2 has some issues where it is not working properly in some situations.

I was thinking that GW type might have anything to do with it.

Here is the question. What makes a GW to register to GK as H323-GW or VOIP-GW?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
yshraybman Tue, 08/04/2009 - 07:43
User Badges:
  • Bronze, 100 points or more

I figured it out.

allow-connections h323 to h323 will register it as H323-GW type.


This Discussion